M12X1.25 METRIC THREAD REPAIR INSERT KITM12X1.25 METRIC THREAD REPAIR INSERT KIT 38128-2, 10 INSERTS, TWO-WAY INSTALLATION TOOL, DRILL BIT, MAGNETIC TANG BREAK TOOL PILOT NOSE TAP, SPARK PLUG TYPE, FREE RUNNING 10 Inserts Per Kit, 31/64" Fractional Drill Size, 12.30MM Metric Drill Size. Recoil inserts are made from high strength stainless steel wire wound to the shape of a spring thread. The insert is compressed during the installation then allowed to spring back, permanently anchoring it in place. Because it is bigger, the Recoil insert has greater contact area and is normally stronger than the original thread. Kit contains HSS pilot nose tap, drill bit, magnetic tang break tool, 2-way installation tool and inserts. Instructions to use: 1) Drill out hole to recommended drill size 2) Confirm that tap thread matches bolt thread pitch 3) Tap Hole 4) Place Recoil insert on installation tool, positioning the adjustable stop so that the insert tang is centered in the tang slot 5) Wind insert in with light downward pressure until 1/4 to1/2 turn below the surface 6) Do not attempt to twist tang off with tool! Lift tool from tang, turn the tool 90 and tap down sharply. Use tang break-off tool where supplied. For sparkplug and large fine thread inserts, use long nose pliers to pull tang out.
Shipping Information: Weight 11.00 lbs
Fasteners hardware Thread Repair Inserts Recoilhelicoil Spring Type - RECOILM12X1.25KIT - M12x1.25 METRIC THREAD REPAIR INSERT KIT
100% Satisfaction Guarantee: At Mansion Tools, we want to be sure that the item you choose is the right one for you. Within 30 days of delivery of your order, you may return any merchandise purchased from Mansion Tools in its original condition with your email order confirmation or packing slip. Restocking fees may apply. On items over $275 shipping within the US, we will even arrange free pick up or pay for returns shipping.